The V-Edge 1.8m personal fall limiter is a light weight option for leading edge applications. Engineered for use in overhead and foot-level tie off points, and where leading edge hazards are a concern. The device has been successfully tested for horizontal use over a steel edge without burrs using the methods in VG11 CNB/P/11.060 (edge type A - 0.5 mm). The V-EDGE Mini PFL is also specifically tested and suitable for use on Mobile Elevating Working platforms (DIN 19427:2017-04, a peak force at the anchor point below 3kN).

Stay safe while working in leading edge scenarios. Make selection and use of Self-Retracting Lanyards simpler with the new V-SHOCK line of SRLs. Available in multiple lengths and snaphook configurations for a variety of applications.

The V-TEC line of PFLs - the performance you demand from MSA. Incorporating user-inspired conveniences, the V-TEC series of personal fall limiters will provide your workforce the safety they need in a compact and lightweight design, getting the job done with the comfort and performance they demand. 

Sealed Retractable Lanyard The Latchways Sealed Self-Retracting Lifeline range offers a dependable means of fall protection and has been specifically designed for use in harsh environments such as oil rigs, wind turbines and other offshore applications.

MSA’s V-EDGE SRL is designed to be used for horizontal, overhead, and leading edge applications, taking the guesswork out of equipment selection. Retraction-dampening feature controls rate of lifeline speed, preventing unwanted damage to the unit, and maximising product longevity.

The V-SHOCK Retractable Lanyard is designed to take a beating in the roughest environments and maintains consistent performance under extreme use from one project to the next.

The V-SHOCK Mini Retractable Lifeline is designed to take a beating in the roughest environments and maintains consistent performance under extreme use from one project to the next. It is one of the most compact & lightweight Mini SRLs in its class helping to decrease worker fatigue throughout the workday.

Requires zero calibration or adjustment With premium stainless steel components and innovative engineering, the V-TEC Self Retracting Lifeline incorporates a precision-made spring radial energy absorber that requires zero calibration or adjustment. The retraction dampening feature controls cable retraction speeds preventing pre-mature and accidental load indicator deployment.

Latchways Mini Single and Twin Leg Retractable Lanyard The V-TEC Mini retactable lanyard is the most compact & lightweight self-retracting lanyard ever developed using multiple spring radial energy-absorbing technology. This new design eliminates the need for an external energy-absorber outside of the housing making it the smallest retractable lanyard on the market.

Personal Fall Limiter built for ease of use Make selection and use of Self-Retracting Lanyards simpler with the new V-SHOCK line of SRLs. Available in multiple lengths and snaphook configurations for a variety of applications.

The MSA new range of shock absorbing-lanyards including the versions with a leading edge approval! The energy absorber keeps fall arrest forces below 6 kN. The lanyards are available in web and kernmantel rope configurations with a variety of connectors.

MSA offers several types of reliable restraint lanyards, which are primarily used for travel restriction and work positioning.

The V-SERIES shock absorbing lanyard line simplifies product selection by offering a concise line of standard lanyards that meet a wide range of customer needs. These lightweight safety lanyards not only limit force on the body in a fall, but also on the anchor location. The shock absorbing pouch includes a clear, durable protective cover on the labels to increase service life, and allow for easy inspection.

A fall restraint lanyard connection is used between the anchor point and the body harness to prevent the user from reaching the fall area and work positioning applications. MSA restraint lanyards are available in web and kernmantel rope.

This energy absorbing lanyard is designed to offer a perfect solution for working safely at height in a potentially explosive atmosphere. It is made of Polyester with 5 conductive threads to achieve the anti-static property.

Beam Anchor for Fall Protection Workman FP Stryder™ Beam Anchors quickly and easily attach to an I-beam flange without the need for any tools.

Designed for working at height MSA's Latchways® Freestanding Constant Force post provides assured worker safety at height where there is an occasional or temporary requirement to access flat roofs or structures.

An endless loop sling for lanyards or lifelines MSA offers several web straps and slings for use in a variety of applications.

1/4" galvanized cable in standard lengths Intended to be used in a basket configuration only, the Cable Sling is approved for use by one person at a time with approved systems. Two strands of cable sling must be of equal length to ensure an even distribution of a load.

Safety Carabiners MSA offers a wide variety of carabiners for almost every application. All carabiners have a minimum breaking strength of 5,000 lbs/22,24 kN.

The MSA Fall Protection Kits provide ready-to-use solutions to keep workers safe when working at height, simplifying the choice for the most common applications.

Confined Space Tripod kit for entry and rescue Tripod confined space entry kits provide simple ordering with all the necessary components for a complete safety system. Kits are ideal for applications in tanks, manholes and other vertical entry work practices.

Confined Space Personnel & Material Hoist The new MSA Winch is rugged, versatile and economical for lifting, lowering and positioning personnel and materials within confined space applications. Designed for maximum 140 kg workload for personnel and 225 kg for materials, the MSA Winch is built with tough thermoplastic housing to ensure high performance within the harshest environments. Winch offers integral, ergonomic carrying grip and unique, foldable handle for simple storage. Patent-pending bracket design allows for easy, rapid assembly.

Confined Space Personnel & Material Hoist The new MSA Winch is rugged, versatile and economical for lifting, lowering and positioning personnel and materials within confined space applications. Designed for maximum 140 kg workload for personnel and 225 kg for materials, the MSA Winch is built with tough thermoplastic housing to ensure high performance within the harshest environments. Winch offers integral, ergonomic carrying grip and unique, foldable handle for simple storage. Patent-pending bracket design allows for easy, rapid assembly.

The MSA Tripod makes confined space entry with vertical descent easy. It features internal leg-locking mechanism, maximum height indicator on the tripod legs, cut-resistant leg pin retention chains, recessed product labels, reduced weight and integral carrying strap. It can be set up and dismantled without the use of tools.

Personal Rescue Device - significantly reduces rescue time The MSA Latchways® PRD is a lightweight, unobtrusive personal rescue device that is an integrated full body harness system for self-rescue. In the event of a fall the device lowers the person gently to the ground in a controlled descent.

XTIRPA System for Confined Space Entry MSA XTIRPA confined space entry systems allow for vertical or horizontal entry into many common confined space applications such tanks, vessels, transformers, sewers & manholes. These systems are lightweight, portable and easy to setup allowing for users to save time throughout the workday.

Ideal for confined spaces The Rescue Utility System is primarily used for raising and lowering people or equipment in rescue and industrial work access and ideal for confined space applications. A 4:1 rescue pulley system Pulleys are equipped with a built-in anti-reversing lock. Offers rapid deployment, is virtually maintenance free, and is rated for two-person load.

A stretcher bridle to fit a rescuer's needs The Stretcher Bridle is used as connection to a rescue stretcher in evacuation or rescue situation and is available in 4 point or 5 point versions. Stretcher not included.

Stay safe while working in a suspended position The Anthron Descender is a manually operated, controlled descent device most commonly used for suspended work positioning, self-evacuation, or rescue operations. A cam assembly provides friction on the rope to hold a load or allow the load to descend at a controlled rate. The system consists of a 7/16" (11mm) rope, the Anthron Descender, and two carabiners. Proper roping and rigging diagrams are on the side of the device, which can be installed or removed at any point on the rope and has a working load of 300 pounds (136 kg).

Temporary Horizontal Lifeline offering two worker bypass MSA’s newly enhanced Gravity Temporary Horizontal Lifelines offer unique, exclusive bypass shuttles enabling two workers to share a line and pass each other while maintaining 100% tie-off. The Gravity Temporary Synthetic Horizontal Lifeline, designed for easy installation and removal, suits many applications. System mounts to any suitable 5,000-lb-rated anchorage point and uses many standard components. Integral line tensioner helps to ensure proper lifeline tensioning.

Designed for easy installation Through intuitive and toolless installation features, MSA's Temporary horizontal lifelines can help save time on the jobsite.

75% faster install than traditional cable systems The completely toolless installation of MSA's THLL helps to save time and increase efficiency when setting up lifelines on the jobsite.

The Easy Move device with lifeline is used to provide temporary fall protection on ladders or when climbing. This system can also be used to provide a secondary lifeline for suspended positioning systems used by building/structure inspectors, window cleaners, andmaintenance personnel. The vertical lifeline kit consists of 15, 20, 25 or 30m of 11mm polyamide rope with sewn eyelets, Easy Move device and carrying bag.

Rope vertical lifelines and rope grabs are used together as a system. Rope Grabs are designed as a means of fall arrest between a worker wearing a compatible full-body harness and a suitable fall arrest anchorage. Applications include roofing, ladder climbing, general construction and tower climbing.
*Available in permanent and temporary models
*Uses a stainless steel fall arrester

Ladder fall protection for vertical structures up to 300 feet SureClimb® Vertical Lifeline Cable Systems and cable grabs are designed to provide ladder fall protection when climbing or descending ladders or vertical structures up to 300 feet in height. MSA SureClimb Fall Protection Systems are designed for temporary ladder climbing applications.
*Temporary vertical lifeline fall protection system
*Uses a stainless steel fall arrester
*Uses a 5/16" galvanized steel cable
*COMPATIBLE WITH SURECLIMB® CABLE GRAB ONLY (Part Number: 10040010)

Maximize harness comfort with these accessories MSA's Harness Accessories maximize user comfort and allow customization of harnesses.
*Comfort pads provide additional comfort at seat, shoulders, and chest when prolonged suspension or extra tool loads are necessary
*Bosun Chairs include a padded seat and will keep the user in an upright position for long durations
*Economic back supports provide additional comfort at the lower back when prolonged suspension or extra tool loads are necessary
*Suspension Trauma Safety Steps allows workers to relieve pressure by insert a foot into the step loops and then standing up in the harness to increase blood flow
*Lanyard Connector Adapters extend the back D-ring attachment point 18" from the center of the user's back allowing easier attachment of lanyards
*Check availability in your country

The Suspension Trauma Safety Step is designed to help workers in a post-fall suspension position avoid the effects of suspension trauma. Workers can use a single Safety Step or two Safety Steps (one for each leg) to provide additional support, balance, and comfort.

Latchways Vertical Ladder Lifeline Kits allow for hands-free movement up and down the entire height of the fixed ladder, eliminating the need to disconnect and find new tie-off points while ascending or descending the ladder. These vertical ladder lifeline kits come in multiple lengths for different ladder heights and must be used in conjunction with the Latchways LadderLatch™ climbing device (sold separately).

MSA's range of Latchways® Engineered Vertical Lifeline Systems for ladders provide outstanding personal safety for individuals working on any type of fixed tower ladder, industrial ladder. Applications include cranes and silos.
MSA's Latchways Engineered Vertical Lifeline Systems for towers, have the inherent flexibility to be configured for use on virtually any design of power transmission tower.

The MSA WinGrip vacuum anchor fall protection system is used in aircraft manufacturing and maintenance, as well as a variety of other environments and industrial applications.
WinGrip is safe and flexible, it can be used on the fuselage, stabilisers and wings; the system is quick to install, simple to use and is suitable for work inside the hangar and outside on the apron.

The MSA range of Latchways® Walksafe is a leading roof walkway system that has been trusted for decades in roof access strategies. Roof walkways provide a delineated access route that restricts the worker to safe zones when working at height. Walkways provide traction for user to prevent slips and trip, but also work to protect the roof surface from foot traffic.

The MSA Latchways® Single Point Anchor range provides permanently fixed and removable anchor devices to which a worker can confidently and safely attach a connecting device. The MSA Latchways Single Point Anchors can be used in a wide variety of environments and applications, such as construction, general industry, power generation or transmission, wind energy, etc.